# HG changeset patch # User mhessling@81767d24-ef19-dc11-ae90-00e081727c95 # Date 1239500510 0 # Node ID fda03b13ebdaf0ff3e3c1d07b16637fb2745a953 # Parent 54e7cd9c98eea4e8b5e175d6d090bb62137f8115 Remove CVS remnants diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/checkoutlist --- a/CVSROOT/checkoutlist Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,14 +0,0 @@ -# The "checkoutlist" file is used to support additional version controlled -# administrative files in $CVSROOT/CVSROOT, such as template files. -# -# The first entry on a line is a filename which will be checked out from -# the corresponding RCS file in the $CVSROOT/CVSROOT directory. -# The remainder of the line is an error message to use if the file cannot -# be checked out. -# -# File format: -# -# [] -# -# comment lines begin with '#' -writeinfo Cannot checkout writeinfo ! diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/commitinfo --- a/CVSROOT/commitinfo Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,16 +0,0 @@ -# The "commitinfo" file is used to control pre-commit checks. -# The filter on the right is invoked with the repository and a list -# of files to check. A non-zero exit of the filter program will -# cause the commit to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". -ALL D:\nosaadm\cvssec.cmd CHECKCOMMIT diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/config --- a/CVSROOT/config Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,11 +0,0 @@ -# Set this to "no" if pserver shouldn't check system users/passwords -#SystemAuth=no - -# Set `PreservePermissions' to `yes' to save file status information -# in the repository. -#PreservePermissions=no - -# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top -# level of the new working directory when using the `cvs checkout' -# command. -#TopLevelAdmin=no diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/cvswrappers --- a/CVSROOT/cvswrappers Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,77 +0,0 @@ -# -# $Id$ -# -# This file affects handling of files based on their names. -# -# The -t/-f options allow one to treat directories of files -# as a single file, or to transform a file in other ways on -# its way in and out of CVS. -# -# The -m option specifies whether CVS attempts to merge files. -# -# The -k option specifies keyword expansion (e.g. -kb for binary). -# -# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers) -# -# wildcard [option value][option value]... -# -# where option is one of -# -f from cvs filter value: path to filter -# -t to cvs filter value: path to filter -# -m update methodology value: MERGE or COPY -# -k expansion mode value: b, o, kkv, &c -# -# and value is a single-quote delimited value. -# For example: -#*.gif -k 'b' - -# binaries (should normally not be added to the archive ) -*.exe -k 'b' -*.sys -k 'b' -*.obj -k 'b' -*.res -l 'b' - -# diverse others -*.zip -k 'b' -*.etc -k 'b' -*.pch -k 'b' -*.err -k 'b' -*.map -k 'b' - -# icon and mouse pointer formats -*.ico -k 'b' -*.ptr -k 'b' -*.cur -k 'b' -*.ani -k 'b' -*.and -k 'b' - -# font files -*.ttf -k 'b' -*.fnt -k 'b' - -# bitmap formats -*.bmp -k 'b' -*.gif -k 'b' -*.jpg -k 'b' -*.jpeg -k 'b' -*.pcx -k 'b' -*.tga -k 'b' -*.tif -k 'b' -*.tiff -k 'b' -*.dib -k 'b' -*.mng -k 'b' -*.png -k 'b' -*.xpm -k 'b' - -# presentation formats -*.pdf -k 'b' -*.ps -k 'b' - - -# video and audio files -*.mov -k 'b' -*.avi -k 'b' -*.mpg -k 'b' -*.mp2 -k 'b' -*.mp3 -k 'b' - diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/editinfo --- a/CVSROOT/editinfo Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,21 +0,0 @@ -# The "editinfo" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository. diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/loginfo --- a/CVSROOT/loginfo Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,26 +0,0 @@ -# The "loginfo" file controls where "cvs commit" log information -# is sent. The first entry on a line is a regular expression which must match -# the directory that the change is being made to, relative to the -# $CVSROOT. If a match is found, then the remainder of the line is a filter -# program that should expect log information on its standard input. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name ALL appears as a regular expression it is always used -# in addition to the first matching regex or DEFAULT. -# -# You may specify a format string as part of the -# filter. The string is composed of a `%' followed -# by a single format character, or followed by a set of format -# characters surrounded by `{' and `}' as separators. The format -# characters are: -# -# s = file name -# V = old version number (pre-checkin) -# v = new version number (post-checkin) -# -# For example: -#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog -# or -#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/modules --- a/CVSROOT/modules Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,26 +0,0 @@ -# Three different line formats are valid: -# key -a aliases... -# key [options] directory -# key [options] directory files... -# -# Where "options" are composed of: -# -i prog Run "prog" on "cvs commit" from top-level of module. -# -o prog Run "prog" on "cvs checkout" of module. -# -e prog Run "prog" on "cvs export" of module. -# -t prog Run "prog" on "cvs rtag" of module. -# -u prog Run "prog" on "cvs update" of module. -# -d dir Place module in directory "dir" instead of module name. -# -l Top-level directory only -- do not recurse. -# -# NOTE: If you change any of the "Run" options above, you'll have to -# release and re-checkout any working directories of these modules. -# -# And "directory" is a path to a directory relative to $CVSROOT. -# -# The "-a" option specifies an alias. An alias is interpreted as if -# everything on the right of the "-a" had been typed on the command line. -# -# You can encode a module within a module by using the special '&' -# character to interpose another module into the current module. This -# can be useful for creating a module that consists of many directories -# spread out over the entire source repository. diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/notify --- a/CVSROOT/notify Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,12 +0,0 @@ -# The "notify" file controls where notifications from watches set by -# "cvs watch add" or "cvs edit" are sent. The first entry on a line is -# a regular expression which is tested against the directory that the -# change is being made to, relative to the $CVSROOT. If it matches, -# then the remainder of the line is a filter program that should contain -# one occurrence of %s for the user to notify, and information on its -# standard input. -# -# "ALL" or "DEFAULT" can be used in place of the regular expression. -# -# For example: -#ALL mail %s -s "CVS notification" diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/rcsinfo --- a/CVSROOT/rcsinfo Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,13 +0,0 @@ -# The "rcsinfo" file is used to control templates with which the editor -# is invoked on commit and import. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being made to, relative to the -# $CVSROOT. For the first match that is found, then the remainder of the -# line is the name of the file that contains the template. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/taginfo --- a/CVSROOT/taginfo Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,21 +0,0 @@ -# The "taginfo" file is used to control pre-tag checks. -# The filter on the right is invoked with the following arguments: -# -# $1 -- tagname -# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d -# $3 -- repository -# $4-> file revision [file revision ...] -# -# A non-zero exit of the filter program will cause the tag to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". -ALL D:\nosaadm\cvssec.cmd CHECKTAG diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/verifymsg --- a/CVSROOT/verifymsg Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,21 +0,0 @@ -# The "verifymsg" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository. diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/writeinfo --- a/CVSROOT/writeinfo Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,7 +0,0 @@ -/ * -/CVSROOT ktk -/dll * -/gtk * -/lib * -/os2 * -/win * diff -r 54e7cd9c98ee -r fda03b13ebda CVSROOT/writers --- a/CVSROOT/writers Sun Apr 12 01:31:47 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,3 +0,0 @@ -ktk -bsmith -mhessling