Mercurial > dwindows
view acinclude.m4 @ 2936:75f6e21f5a02
C++: Connected the wrong signal for the HTML result, causing crashes.
| author | bsmith@81767d24-ef19-dc11-ae90-00e081727c95 |
|---|---|
| date | Sat, 31 Dec 2022 03:12:38 +0000 |
| parents | 67a643a734d9 |
| children | 83c17a84bc27 |
line wrap: on
line source
dnl aclocal.m4 generated automatically by aclocal 1.4a dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. # Configure paths for GLIB # Owen Taylor 97-11-3 dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or dnl gthread is specified in MODULES, pass to glib-config dnl AC_DEFUN(AM_PATH_GLIB, [dnl dnl Get the cflags and libraries from the glib-config script dnl AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)], glib_config_prefix="$withval", glib_config_prefix="") AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)], glib_config_exec_prefix="$withval", glib_config_exec_prefix="") AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program], , enable_glibtest=yes) if test x$glib_config_exec_prefix != x ; then glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix" if test x${GLIB_CONFIG+set} != xset ; then GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config fi fi if test x$glib_config_prefix != x ; then glib_config_args="$glib_config_args --prefix=$glib_config_prefix" if test x${GLIB_CONFIG+set} != xset ; then GLIB_CONFIG=$glib_config_prefix/bin/glib-config fi fi for module in . $4 do case "$module" in gmodule) glib_config_args="$glib_config_args gmodule" ;; gthread) glib_config_args="$glib_config_args gthread" ;; esac done AC_PATH_PROG(GLIB_CONFIG, glib-config, no) min_glib_version=ifelse([$1], ,1.2.0,$1) AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) no_glib="" if test "$GLIB_CONFIG" = "no" ; then no_glib=yes else GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags` GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs` glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_glibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$GLIB_LIBS $LIBS" dnl dnl Now check if the installed GLIB is sufficiently new. (Also sanity dnl checks the results of glib-config to some extent dnl rm -f conf.glibtest AC_TRY_RUN([ #include <glib.h> #include <stdio.h> #include <stdlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.glibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_glib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_glib_version"); exit(1); } if ((glib_major_version != $glib_config_major_version) || (glib_minor_version != $glib_config_minor_version) || (glib_micro_version != $glib_config_micro_version)) { printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, glib_major_version, glib_minor_version, glib_micro_version); printf ("*** was found! If glib-config was correct, then it is best\n"); printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n"); printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n"); printf("*** before re-running configure\n"); } else if ((glib_major_version != GLIB_MAJOR_VERSION) || (glib_minor_version != GLIB_MINOR_VERSION) || (glib_micro_version != GLIB_MICRO_VERSION)) { printf("*** GLIB header files (version %d.%d.%d) do not match\n", GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", glib_major_version, glib_minor_version, glib_micro_version); } else { if ((glib_major_version > major) || ((glib_major_version == major) && (glib_minor_version > minor)) || ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", glib_major_version, glib_minor_version, glib_micro_version); printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the glib-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n"); printf("*** correct copy of glib-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_glib" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$GLIB_CONFIG" = "no" ; then echo "*** The glib-config script installed by GLIB could not be found" echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the GLIB_CONFIG environment variable to the" echo "*** full path to glib-config." else if test -f conf.glibtest ; then : else echo "*** Could not run GLIB test program, checking why..." CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$LIBS $GLIB_LIBS" AC_TRY_LINK([ #include <glib.h> #include <stdio.h> ], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GLIB or finding the wrong" echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GLIB was incorrectly installed" echo "*** or that you have moved GLIB since it was installed. In the latter case, you" echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GLIB_CFLAGS="" GLIB_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GLIB_CFLAGS) AC_SUBST(GLIB_LIBS) rm -f conf.glibtest ]) # Configure paths for GTK+ # Owen Taylor 97-11-3 dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS dnl AC_DEFUN(AM_PATH_GTK, [dnl dnl Get the cflags and libraries from the gtk-config script dnl AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)], gtk_config_prefix="$withval", gtk_config_prefix="") AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)], gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="") AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program], , enable_gtktest=yes) for module in . $4 do case "$module" in gthread) gtk_config_args="$gtk_config_args gthread" ;; esac done if test x$gtk_config_exec_prefix != x ; then gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix" if test x${GTK_CONFIG+set} != xset ; then GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config fi fi if test x$gtk_config_prefix != x ; then gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix" if test x${GTK_CONFIG+set} != xset ; then GTK_CONFIG=$gtk_config_prefix/bin/gtk-config fi fi AC_PATH_PROG(GTK_CONFIG, gtk-config, no) min_gtk_version=ifelse([$1], ,1.2.0,$1) AC_MSG_CHECKING(for GTK - version >= $min_gtk_version) no_gtk="" if test "$GTK_CONFIG" = "no" ; then no_gtk=yes else GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags` GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs` gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" dnl dnl Now check if the installed GTK is sufficiently new. (Also sanity dnl checks the results of gtk-config to some extent dnl rm -f conf.gtktest AC_TRY_RUN([ #include <gtk/gtk.h> #include <stdio.h> #include <stdlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If gtk-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n"); printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n"); printf("*** before re-running configure\n"); } #if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION) else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } #endif /* defined (GTK_MAJOR_VERSION) ... */ else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the gtk-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n"); printf("*** correct copy of gtk-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$GTK_CONFIG" = "no" ; then echo "*** The gtk-config script installed by GTK could not be found" echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the GTK_CONFIG environment variable to the" echo "*** full path to gtk-config." else if test -f conf.gtktest ; then : else echo "*** Could not run GTK test program, checking why..." CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" AC_TRY_LINK([ #include <gtk/gtk.h> #include <stdio.h> ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK or finding the wrong" echo "*** version of GTK. If it is not finding GTK, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GTK was incorrectly installed" echo "*** or that you have moved GTK since it was installed. In the latter case, you" echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GTK_CFLAGS) AC_SUBST(GTK_LIBS) rm -f conf.gtktest ]) # Configure paths for IMLIB # David Walluck 99-9-18 # Frank Belew 98-8-31 # stolen from Manish Singh # Shamelessly stolen from Owen Taylor dnl AM_PATH_IMLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for IMLIB, and define IMLIB_CFLAGS and IMLIB_LIBS dnl AC_DEFUN(AM_PATH_IMLIB, [dnl dnl Get the cflags and libraries from the imlib-config script dnl AC_ARG_WITH(imlib-prefix,[ --with-imlib-prefix=PFX Prefix where IMLIB is installed (optional)], imlib_prefix="$withval", imlib_prefix="") AC_ARG_WITH(imlib-exec-prefix,[ --with-imlib-exec-prefix=PFX Exec prefix where IMLIB is installed (optional)], imlib_exec_prefix="$withval", imlib_exec_prefix="") AC_ARG_ENABLE(imlibtest, [ --disable-imlibtest Do not try to compile and run a test IMLIB program], , enable_imlibtest=yes) if test x$imlib_exec_prefix != x ; then imlib_args="$imlib_args --exec-prefix=$imlib_exec_prefix" if test x${IMLIB_CONFIG+set} != xset ; then IMLIB_CONFIG=$imlib_exec_prefix/bin/imlib-config fi fi if test x$imlib_prefix != x ; then imlib_args="$imlib_args --prefix=$imlib_prefix" if test x${IMLIB_CONFIG+set} != xset ; then IMLIB_CONFIG=$imlib_prefix/bin/imlib-config fi fi AC_PATH_PROG(IMLIB_CONFIG, imlib-config, no) min_imlib_version=ifelse([$1], ,1.9.4,$1) AC_MSG_CHECKING(for IMLIB - version >= $min_imlib_version) no_imlib="" if test "$IMLIB_CONFIG" = "no" ; then no_imlib=yes else IMLIB_CFLAGS=`$IMLIB_CONFIG $imlibconf_args --cflags` IMLIB_LIBS=`$IMLIB_CONFIG $imlibconf_args --libs` imlib_major_version=`$IMLIB_CONFIG $imlib_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` imlib_minor_version=`$IMLIB_CONFIG $imlib_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` imlib_micro_version=`$IMLIB_CONFIG $imlib_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_imlibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $IMLIB_CFLAGS" LIBS="$LIBS $IMLIB_LIBS" dnl dnl Now check if the installed IMLIB is sufficiently new. (Also sanity dnl checks the results of imlib-config to some extent dnl rm -f conf.imlibtest AC_TRY_RUN([ #include <stdio.h> #include <stdlib.h> #include <Imlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.imlibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_imlib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_imlib_version"); exit(1); } if (($imlib_major_version > major) || (($imlib_major_version == major) && ($imlib_minor_version > minor)) || (($imlib_major_version == major) && ($imlib_minor_version == minor) && ($imlib_micro_version >= micro))) { return 0; } else { printf("\n*** 'imlib-config --version' returned %d.%d.%d, but the minimum version\n", $imlib_major_version, $imlib_minor_version, $imlib_micro_version); printf("*** of IMLIB required is %d.%d.%d. If imlib-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If imlib-config was wrong, set the environment variable IMLIB_CONFIG\n"); printf("*** to point to the correct copy of imlib-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_imlib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_imlib" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$IMLIB_CONFIG" = "no" ; then echo "*** The imlib-config script installed by IMLIB could not be found" echo "*** If IMLIB was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the IMLIB_CONFIG environment variable to the" echo "*** full path to imlib-config." else if test -f conf.imlibtest ; then : else echo "*** Could not run IMLIB test program, checking why..." CFLAGS="$CFLAGS $IMLIB_CFLAGS" LIBS="$LIBS $IMLIB_LIBS" AC_TRY_LINK([ #include <stdio.h> #include <Imlib.h> ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding IMLIB or finding the wrong" echo "*** version of IMLIB. If it is not finding IMLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means IMLIB was incorrectly installed" echo "*** or that you have moved IMLIB since it was installed. In the latter case, you" echo "*** may want to edit the imlib-config script: $IMLIB_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi IMLIB_CFLAGS="" IMLIB_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(IMLIB_CFLAGS) AC_SUBST(IMLIB_LIBS) rm -f conf.imlibtest ]) # Check for gdk-imlib AC_DEFUN(AM_PATH_GDK_IMLIB, [dnl dnl Get the cflags and libraries from the imlib-config script dnl AC_ARG_WITH(imlib-prefix,[ --with-imlib-prefix=PFX Prefix where IMLIB is installed (optional)], imlib_prefix="$withval", imlib_prefix="") AC_ARG_WITH(imlib-exec-prefix,[ --with-imlib-exec-prefix=PFX Exec prefix where IMLIB is installed (optional)], imlib_exec_prefix="$withval", imlib_exec_prefix="") AC_ARG_ENABLE(imlibtest, [ --disable-imlibtest Do not try to compile and run a test IMLIB program], , enable_imlibtest=yes) if test x$imlib_exec_prefix != x ; then imlib_args="$imlib_args --exec-prefix=$imlib_exec_prefix" if test x${IMLIB_CONFIG+set} != xset ; then IMLIB_CONFIG=$imlib_exec_prefix/bin/imlib-config fi fi if test x$imlib_prefix != x ; then imlib_args="$imlib_args --prefix=$imlib_prefix" if test x${IMLIB_CONFIG+set} != xset ; then IMLIB_CONFIG=$imlib_prefix/bin/imlib-config fi fi AC_PATH_PROG(IMLIB_CONFIG, imlib-config, no) min_imlib_version=ifelse([$1], ,1.9.4,$1) AC_MSG_CHECKING(for IMLIB - version >= $min_imlib_version) no_imlib="" if test "$IMLIB_CONFIG" = "no" ; then no_imlib=yes else GDK_IMLIB_CFLAGS=`$IMLIB_CONFIG $imlibconf_args --cflags-gdk` GDK_IMLIB_LIBS=`$IMLIB_CONFIG $imlibconf_args --libs-gdk` imlib_major_version=`$IMLIB_CONFIG $imlib_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` imlib_minor_version=`$IMLIB_CONFIG $imlib_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` imlib_micro_version=`$IMLIB_CONFIG $imlib_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_imlibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GDK_IMLIB_CFLAGS" LIBS="$LIBS $GDK_IMLIB_LIBS" dnl dnl Now check if the installed IMLIB is sufficiently new. (Also sanity dnl checks the results of imlib-config to some extent dnl rm -f conf.imlibtest AC_TRY_RUN([ #include <stdio.h> #include <stdlib.h> #include <gdk_imlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gdkimlibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_imlib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_imlib_version"); exit(1); } if (($imlib_major_version > major) || (($imlib_major_version == major) && ($imlib_minor_version > minor)) || (($imlib_major_version == major) && ($imlib_minor_version == minor) && ($imlib_micro_version >= micro))) { return 0; } else { printf("\n*** 'imlib-config --version' returned %d.%d.%d, but the minimum version\n", $imlib_major_version, $imlib_minor_version, $imlib_micro_version); printf("*** of IMLIB required is %d.%d.%d. If imlib-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If imlib-config was wrong, set the environment variable IMLIB_CONFIG\n"); printf("*** to point to the correct copy of imlib-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_imlib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_imlib" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$IMLIB_CONFIG" = "no" ; then echo "*** The imlib-config script installed by IMLIB could not be found" echo "*** If IMLIB was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the IMLIB_CONFIG environment variable to the" echo "*** full path to imlib-config." else if test -f conf.gdkimlibtest ; then : else echo "*** Could not run IMLIB test program, checking why..." CFLAGS="$CFLAGS $GDK_IMLIB_CFLAGS" LIBS="$LIBS $GDK_IMLIB_LIBS" AC_TRY_LINK([ #include <stdio.h> #include <gdk_imlib.h> ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding IMLIB or finding the wrong" echo "*** version of IMLIB. If it is not finding IMLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means IMLIB was incorrectly installed" echo "*** or that you have moved IMLIB since it was installed. In the latter case, you" echo "*** may want to edit the imlib-config script: $IMLIB_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GDK_IMLIB_CFLAGS="" GDK_IMLIB_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GDK_IMLIB_CFLAGS) AC_SUBST(GDK_IMLIB_LIBS) rm -f conf.gdkimlibtest ]) # Configure paths for ESD # David Walluck 99-9-20 # Manish Singh 98-9-30 # stolen back from Frank Belew # stolen from Manish Singh # Shamelessly stolen from Owen Taylor dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS dnl AC_DEFUN(AM_PATH_ESD, [dnl dnl Get the cflags and libraries from the esd-config script dnl AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)], esd_prefix="$withval", esd_prefix="") AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)], esd_exec_prefix="$withval", esd_exec_prefix="") AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program], , enable_esdtest=yes) if test x$esd_exec_prefix != x ; then esd_args="$esd_args --exec-prefix=$esd_exec_prefix" if test x${ESD_CONFIG+set} != xset ; then ESD_CONFIG=$esd_exec_prefix/bin/esd-config fi fi if test x$esd_prefix != x ; then esd_args="$esd_args --prefix=$esd_prefix" if test x${ESD_CONFIG+set} != xset ; then ESD_CONFIG=$esd_prefix/bin/esd-config fi fi AC_PATH_PROG(ESD_CONFIG, esd-config, no) min_esd_version=ifelse([$1], ,0.2.5,$1) AC_MSG_CHECKING(for ESD - version >= $min_esd_version) no_esd="" if test "$ESD_CONFIG" = "no" ; then no_esd=yes else ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags` ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs` esd_major_version=`$ESD_CONFIG $esd_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` esd_minor_version=`$ESD_CONFIG $esd_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_esdtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $ESD_CFLAGS" LIBS="$LIBS $ESD_LIBS" dnl dnl Now check if the installed ESD is sufficiently new. (Also sanity dnl checks the results of esd-config to some extent dnl rm -f conf.esdtest AC_TRY_RUN([ #include <stdio.h> #include <stdlib.h> #include <esd.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.esdtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_esd_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_esd_version"); exit(1); } if (($esd_major_version > major) || (($esd_major_version == major) && ($esd_minor_version > minor)) || (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro))) { return 0; } else { printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version); printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n"); printf("*** to point to the correct copy of esd-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_esd" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$ESD_CONFIG" = "no" ; then echo "*** The esd-config script installed by ESD could not be found" echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the ESD_CONFIG environment variable to the" echo "*** full path to esd-config." else if test -f conf.esdtest ; then : else echo "*** Could not run ESD test program, checking why..." CFLAGS="$CFLAGS $ESD_CFLAGS" LIBS="$LIBS $ESD_LIBS" AC_TRY_LINK([ #include <stdio.h> #include <esd.h> ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding ESD or finding the wrong" echo "*** version of ESD. If it is not finding ESD, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means ESD was incorrectly installed" echo "*** or that you have moved ESD since it was installed. In the latter case, you" echo "*** may want to edit the esd-config script: $ESD_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi ESD_CFLAGS="" ESD_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(ESD_CFLAGS) AC_SUBST(ESD_LIBS) rm -f conf.esdtest ]) # Configure paths for AUDIOFILE # Bertrand Guiheneuf 98-10-21 # stolen from esd.m4 in esound : # Manish Singh 98-9-30 # stolen back from Frank Belew # stolen from Manish Singh # Shamelessly stolen from Owen Taylor dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for AUDIOFILE, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS dnl AC_DEFUN(AM_PATH_AUDIOFILE, [dnl dnl Get the cflags and libraries from the audiofile-config script dnl AC_ARG_WITH(audiofile-prefix,[ --with-audiofile-prefix=PFX Prefix where AUDIOFILE is installed (optional)], audiofile_prefix="$withval", audiofile_prefix="") AC_ARG_WITH(audiofile-exec-prefix,[ --with-audiofile-exec-prefix=PFX Exec prefix where AUDIOFILE is installed (optional)], audiofile_exec_prefix="$withval", audiofile_exec_prefix="") AC_ARG_ENABLE(audiofiletest, [ --disable-audiofiletest Do not try to compile and run a test AUDIOFILE program], , enable_audiofiletest=yes) if test x$audiofile_exec_prefix != x ; then audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix" if test x${AUDIOFILE_CONFIG+set} != xset ; then AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config fi fi if test x$audiofile_prefix != x ; then audiofile_args="$audiofile_args --prefix=$audiofile_prefix" if test x${AUDIOFILE_CONFIG+set} != xset ; then AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config fi fi AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no) min_audiofile_version=ifelse([$1], ,0.1.5,$1) AC_MSG_CHECKING(for AUDIOFILE - version >= $min_audiofile_version) no_audiofile="" if test "$AUDIOFILE_CONFIG" = "no" ; then no_audiofile=yes else AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs` AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags` audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_audiofiletest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS" LIBS="$LIBS $AUDIOFILE_LIBS" dnl dnl Now check if the installed AUDIOFILE is sufficiently new. (Also sanity dnl checks the results of audiofile-config to some extent dnl rm -f conf.audiofiletest AC_TRY_RUN([ #include <stdio.h> #include <stdlib.h> #include <audiofile.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.audiofiletest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_audiofile_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_audiofile_version"); exit(1); } if (($audiofile_major_version > major) || (($audiofile_major_version == major) && ($audiofile_minor_version > minor)) || (($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro))) { return 0; } else { printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version); printf("*** of AUDIOFILE required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n"); printf("*** to point to the correct copy of audiofile-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_audiofile" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$AUDIOFILE_CONFIG" = "no" ; then echo "*** The audiofile-config script installed by AUDIOFILE could not be found" echo "*** If AUDIOFILE was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the AUDIOFILE_CONFIG environment variable to the" echo "*** full path to audiofile-config." else if test -f conf.audiofiletest ; then : else echo "*** Could not run AUDIOFILE test program, checking why..." CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS" LIBS="$LIBS $AUDIOFILE_LIBS" AC_TRY_LINK([ #include <stdio.h> #include <audiofile.h> ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding AUDIOFILE or finding the wrong" echo "*** version of AUDIOFILE. If it is not finding AUDIOFILE, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means AUDIOFILE was incorrectly installed" echo "*** or that you have moved AUDIOFILE since it was installed. In the latter case, you" echo "*** may want to edit the audiofile-config script: $AUDIOFILE_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi AUDIOFILE_CFLAGS="" AUDIOFILE_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(AUDIOFILE_CFLAGS) AC_SUBST(AUDIOFILE_LIBS) rm -f conf.audiofiletest ]) # Configure paths for GNOME # David Walluck 99-9-24 dnl AM_PATH_GNOME([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for GNOME, and define GNOME_CFLAGS and GNOME_LIBS dnl AC_DEFUN(AM_PATH_GNOME, [dnl dnl Get the cflags and libraries from the gnome-config script dnl AC_ARG_WITH(gnome-prefix,[ --with-gnome-prefix=PFX Prefix where GNOME is installed (optional)], gnome_prefix="$withval", gnome_prefix="") AC_ARG_WITH(gnome-exec-prefix,[ --with-gnome-exec-prefix=PFX Exec prefix where GNOME is installed (optional)], gnome_exec_prefix="$withval", gnome_exec_prefix="") AC_ARG_ENABLE(gnometest, [ --disable-gnometest Do not try to compile and run a test GNOME program], , enable_gnometest=yes) if test x$gnome_exec_prefix != x ; then gnome_args="$gnome_args --exec-prefix=$gnome_exec_prefix" if test x${GNOME_CONFIG+set} != xset ; then GNOME_CONFIG=$gnome_exec_prefix/bin/gnome-config fi fi if test x$gnome_prefix != x ; then gnome_args="$gnome_args --prefix=$gnome_prefix" if test x${GNOME_CONFIG+set} != xset ; then GNOME_CONFIG=$gnome_prefix/bin/gnome-config fi fi AC_PATH_PROG(GNOME_CONFIG, gnome-config, no) min_gnome_version=ifelse([$1], ,0.2.7,$1) AC_MSG_CHECKING(for GNOME - version >= $min_gnome_version) no_gnome="" if test "$GNOME_CONFIG" = "no" ; then no_gnome=yes else GNOME_CFLAGS=`$GNOME_CONFIG $gnomeconf_args gnome --cflags` GNOME_LIBS=`$GNOME_CONFIG $gnomeconf_args gnome --libs` gnome_major_version=`$GNOME_CONFIG $gnome_args --version | \ sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` gnome_minor_version=`$GNOME_CONFIG $gnome_args --version | \ sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` gnome_micro_version=`$GNOME_CONFIG $gnome_config_args --version | \ sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_gnometest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GNOME_CFLAGS" LIBS="$LIBS $GNOME_LIBS" dnl dnl Now check if the installed GNOME is sufficiently new. (Also sanity dnl checks the results of gnome-config to some extent dnl rm -f conf.gnometest AC_TRY_RUN([ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <gnome.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gnometest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gnome_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gnome_version"); exit(1); } if (($gnome_major_version > major) || (($gnome_major_version == major) && ($gnome_minor_version > minor)) || (($gnome_major_version == major) && ($gnome_minor_version == minor) && ($gnome_micro_version >= micro))) { return 0; } else { printf("\n*** 'gnome-config --version' returned %d.%d.%d, but the minimum version\n", $gnome_major_version, $gnome_minor_version, $gnome_micro_version); printf("*** of GNOME required is %d.%d.%d. If gnome-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If gnome-config was wrong, set the environment variable GNOME_CONFIG\n"); printf("*** to point to the correct copy of gnome-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_gnome=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gnome" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$GNOME_CONFIG" = "no" ; then echo "*** The gnome-config script installed by GNOME could not be found" echo "*** If GNOME was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the GNOME_CONFIG environment variable to the" echo "*** full path to gnome-config." else if test -f conf.gnometest ; then : else echo "*** Could not run GNOME test program, checking why..." CFLAGS="$CFLAGS $GNOME_CFLAGS" LIBS="$LIBS $GNOME_LIBS" AC_TRY_LINK([ #include <stdio.h> #include <gnome.h> ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GNOME or finding the wrong" echo "*** version of GNOME. If it is not finding GNOME, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GNOME was incorrectly installed" echo "*** or that you have moved GNOME since it was installed. In the latter case, you" echo "*** may want to edit the gnome-config script: $GNOME_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GNOME_CFLAGS="" GNOME_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GNOME_CFLAGS) AC_SUBST(GNOME_LIBS) rm -f conf.gnometest ])