--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/acinclude.m4	Tue Jul 03 07:50:39 2001 +0000
@@ -0,0 +1,1127 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4a
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+# Configure paths for GLIB
+# Owen Taylor     97-11-3
+
+dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
+dnl gthread is specified in MODULES, pass to glib-config
+dnl
+AC_DEFUN(AM_PATH_GLIB,
+[dnl 
+dnl Get the cflags and libraries from the glib-config script
+dnl
+AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX  Prefix where GLIB is installed (optional)],
+            glib_config_prefix="$withval", glib_config_prefix="")
+AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
+            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
+AC_ARG_ENABLE(glibtest, [  --disable-glibtest      Do not try to compile and run a test GLIB program],
+		    , enable_glibtest=yes)
+
+  if test x$glib_config_exec_prefix != x ; then
+     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
+     if test x${GLIB_CONFIG+set} != xset ; then
+        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
+     fi
+  fi
+  if test x$glib_config_prefix != x ; then
+     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
+     if test x${GLIB_CONFIG+set} != xset ; then
+        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
+     fi
+  fi
+
+  for module in . $4
+  do
+      case "$module" in
+         gmodule) 
+             glib_config_args="$glib_config_args gmodule"
+         ;;
+         gthread) 
+             glib_config_args="$glib_config_args gthread"
+         ;;
+      esac
+  done
+
+  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
+  min_glib_version=ifelse([$1], ,1.2.0,$1)
+  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
+  no_glib=""
+  if test "$GLIB_CONFIG" = "no" ; then
+    no_glib=yes
+  else
+    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
+    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
+    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_glibtest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $GLIB_CFLAGS"
+      LIBS="$GLIB_LIBS $LIBS"
+dnl
+dnl Now check if the installed GLIB is sufficiently new. (Also sanity
+dnl checks the results of glib-config to some extent
+dnl
+      rm -f conf.glibtest
+      AC_TRY_RUN([
+#include <glib.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int 
+main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.glibtest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_glib_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_glib_version");
+     exit(1);
+   }
+
+  if ((glib_major_version != $glib_config_major_version) ||
+      (glib_minor_version != $glib_config_minor_version) ||
+      (glib_micro_version != $glib_config_micro_version))
+    {
+      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
+             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
+             glib_major_version, glib_minor_version, glib_micro_version);
+      printf ("*** was found! If glib-config was correct, then it is best\n");
+      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
+      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+      printf("*** required on your system.\n");
+      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
+      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
+      printf("*** before re-running configure\n");
+    } 
+  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
+	   (glib_minor_version != GLIB_MINOR_VERSION) ||
+           (glib_micro_version != GLIB_MICRO_VERSION))
+    {
+      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
+	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
+      printf("*** library (version %d.%d.%d)\n",
+	     glib_major_version, glib_minor_version, glib_micro_version);
+    }
+  else
+    {
+      if ((glib_major_version > major) ||
+        ((glib_major_version == major) && (glib_minor_version > minor)) ||
+        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
+      {
+        return 0;
+       }
+     else
+      {
+        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
+               glib_major_version, glib_minor_version, glib_micro_version);
+        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
+	       major, minor, micro);
+        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
+        printf("***\n");
+        printf("*** If you have already installed a sufficiently new version, this error\n");
+        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
+        printf("*** being found. The easiest way to fix this is to remove the old version\n");
+        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
+        printf("*** correct copy of glib-config. (In this case, you will have to\n");
+        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+        printf("*** so that the correct libraries are found at run-time))\n");
+      }
+    }
+  return 1;
+}
+],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_glib" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$GLIB_CONFIG" = "no" ; then
+       echo "*** The glib-config script installed by GLIB could not be found"
+       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
+       echo "*** full path to glib-config."
+     else
+       if test -f conf.glibtest ; then
+        :
+       else
+          echo "*** Could not run GLIB test program, checking why..."
+          CFLAGS="$CFLAGS $GLIB_CFLAGS"
+          LIBS="$LIBS $GLIB_LIBS"
+          AC_TRY_LINK([
+#include <glib.h>
+#include <stdio.h>
+],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
+          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
+          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
+          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     GLIB_CFLAGS=""
+     GLIB_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(GLIB_CFLAGS)
+  AC_SUBST(GLIB_LIBS)
+  rm -f conf.glibtest
+])
+
+# Configure paths for GTK+
+# Owen Taylor     97-11-3
+
+dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
+dnl
+AC_DEFUN(AM_PATH_GTK,
+[dnl 
+dnl Get the cflags and libraries from the gtk-config script
+dnl
+AC_ARG_WITH(gtk-prefix,[  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)],
+            gtk_config_prefix="$withval", gtk_config_prefix="")
+AC_ARG_WITH(gtk-exec-prefix,[  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
+            gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
+AC_ARG_ENABLE(gtktest, [  --disable-gtktest       Do not try to compile and run a test GTK program],
+		    , enable_gtktest=yes)
+
+  for module in . $4
+  do
+      case "$module" in
+         gthread) 
+             gtk_config_args="$gtk_config_args gthread"
+         ;;
+      esac
+  done
+
+  if test x$gtk_config_exec_prefix != x ; then
+     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+     if test x${GTK_CONFIG+set} != xset ; then
+        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
+     fi
+  fi
+  if test x$gtk_config_prefix != x ; then
+     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+     if test x${GTK_CONFIG+set} != xset ; then
+        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
+     fi
+  fi
+
+  AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
+  min_gtk_version=ifelse([$1], ,1.2.0,$1)
+  AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
+  no_gtk=""
+  if test "$GTK_CONFIG" = "no" ; then
+    no_gtk=yes
+  else
+    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
+    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
+    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_gtktest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $GTK_CFLAGS"
+      LIBS="$GTK_LIBS $LIBS"
+dnl
+dnl Now check if the installed GTK is sufficiently new. (Also sanity
+dnl checks the results of gtk-config to some extent
+dnl
+      rm -f conf.gtktest
+      AC_TRY_RUN([
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int 
+main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.gtktest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_gtk_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_gtk_version");
+     exit(1);
+   }
+
+  if ((gtk_major_version != $gtk_config_major_version) ||
+      (gtk_minor_version != $gtk_config_minor_version) ||
+      (gtk_micro_version != $gtk_config_micro_version))
+    {
+      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
+             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
+             gtk_major_version, gtk_minor_version, gtk_micro_version);
+      printf ("*** was found! If gtk-config was correct, then it is best\n");
+      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
+      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+      printf("*** required on your system.\n");
+      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
+      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
+      printf("*** before re-running configure\n");
+    } 
+#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
+  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
+	   (gtk_minor_version != GTK_MINOR_VERSION) ||
+           (gtk_micro_version != GTK_MICRO_VERSION))
+    {
+      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
+	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+      printf("*** library (version %d.%d.%d)\n",
+	     gtk_major_version, gtk_minor_version, gtk_micro_version);
+    }
+#endif /* defined (GTK_MAJOR_VERSION) ... */
+  else
+    {
+      if ((gtk_major_version > major) ||
+        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
+      {
+        return 0;
+       }
+     else
+      {
+        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
+               gtk_major_version, gtk_minor_version, gtk_micro_version);
+        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
+	       major, minor, micro);
+        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
+        printf("***\n");
+        printf("*** If you have already installed a sufficiently new version, this error\n");
+        printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
+        printf("*** being found. The easiest way to fix this is to remove the old version\n");
+        printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
+        printf("*** correct copy of gtk-config. (In this case, you will have to\n");
+        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+        printf("*** so that the correct libraries are found at run-time))\n");
+      }
+    }
+  return 1;
+}
+],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_gtk" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$GTK_CONFIG" = "no" ; then
+       echo "*** The gtk-config script installed by GTK could not be found"
+       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the GTK_CONFIG environment variable to the"
+       echo "*** full path to gtk-config."
+     else
+       if test -f conf.gtktest ; then
+        :
+       else
+          echo "*** Could not run GTK test program, checking why..."
+          CFLAGS="$CFLAGS $GTK_CFLAGS"
+          LIBS="$LIBS $GTK_LIBS"
+          AC_TRY_LINK([
+#include <gtk/gtk.h>
+#include <stdio.h>
+],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding GTK or finding the wrong"
+          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
+          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
+          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     GTK_CFLAGS=""
+     GTK_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(GTK_CFLAGS)
+  AC_SUBST(GTK_LIBS)
+  rm -f conf.gtktest
+])
+
+# Configure paths for IMLIB
+# David Walluck   99-9-18   
+# Frank Belew     98-8-31
+# stolen from Manish Singh
+# Shamelessly stolen from Owen Taylor
+
+dnl AM_PATH_IMLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for IMLIB, and define IMLIB_CFLAGS and IMLIB_LIBS
+dnl
+AC_DEFUN(AM_PATH_IMLIB,
+[dnl 
+dnl Get the cflags and libraries from the imlib-config script
+dnl
+AC_ARG_WITH(imlib-prefix,[  --with-imlib-prefix=PFX Prefix where IMLIB is installed (optional)],
+            imlib_prefix="$withval", imlib_prefix="")
+AC_ARG_WITH(imlib-exec-prefix,[  --with-imlib-exec-prefix=PFX Exec prefix where IMLIB is installed (optional)],
+            imlib_exec_prefix="$withval", imlib_exec_prefix="")
+AC_ARG_ENABLE(imlibtest, [  --disable-imlibtest Do not try to compile and run a test IMLIB program],
+		    , enable_imlibtest=yes)
+
+  if test x$imlib_exec_prefix != x ; then
+     imlib_args="$imlib_args --exec-prefix=$imlib_exec_prefix"
+     if test x${IMLIB_CONFIG+set} != xset ; then
+        IMLIB_CONFIG=$imlib_exec_prefix/bin/imlib-config
+     fi
+  fi
+  if test x$imlib_prefix != x ; then
+     imlib_args="$imlib_args --prefix=$imlib_prefix"
+     if test x${IMLIB_CONFIG+set} != xset ; then
+        IMLIB_CONFIG=$imlib_prefix/bin/imlib-config
+     fi
+  fi
+
+  AC_PATH_PROG(IMLIB_CONFIG, imlib-config, no)
+  min_imlib_version=ifelse([$1], ,1.9.4,$1)
+  AC_MSG_CHECKING(for IMLIB - version >= $min_imlib_version)
+  no_imlib=""
+  if test "$IMLIB_CONFIG" = "no" ; then
+    no_imlib=yes
+  else
+    IMLIB_CFLAGS=`$IMLIB_CONFIG $imlibconf_args --cflags`
+    IMLIB_LIBS=`$IMLIB_CONFIG $imlibconf_args --libs`
+
+    imlib_major_version=`$IMLIB_CONFIG $imlib_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    imlib_minor_version=`$IMLIB_CONFIG $imlib_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    imlib_micro_version=`$IMLIB_CONFIG $imlib_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_imlibtest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $IMLIB_CFLAGS"
+      LIBS="$LIBS $IMLIB_LIBS"
+dnl
+dnl Now check if the installed IMLIB is sufficiently new. (Also sanity
+dnl checks the results of imlib-config to some extent
+dnl
+      rm -f conf.imlibtest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <Imlib.h>
+
+int main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.imlibtest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_imlib_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_imlib_version");
+     exit(1);
+   }
+
+    if (($imlib_major_version > major) ||
+        (($imlib_major_version == major) && ($imlib_minor_version > minor)) ||
+	(($imlib_major_version == major) && ($imlib_minor_version == minor) &&
+	($imlib_micro_version >= micro)))
+    {
+      return 0;
+    }
+  else
+    {
+      printf("\n*** 'imlib-config --version' returned %d.%d.%d, but the minimum version\n", $imlib_major_version, $imlib_minor_version, $imlib_micro_version);
+      printf("*** of IMLIB required is %d.%d.%d. If imlib-config is correct, then it is\n", major, minor, micro);
+      printf("*** best to upgrade to the required version.\n");
+      printf("*** If imlib-config was wrong, set the environment variable IMLIB_CONFIG\n");
+      printf("*** to point to the correct copy of imlib-config, and remove the file\n");
+      printf("*** config.cache before re-running configure\n");
+      return 1;
+    }
+}
+
+],, no_imlib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_imlib" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$IMLIB_CONFIG" = "no" ; then
+       echo "*** The imlib-config script installed by IMLIB could not be found"
+       echo "*** If IMLIB was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the IMLIB_CONFIG environment variable to the"
+       echo "*** full path to imlib-config."
+     else
+       if test -f conf.imlibtest ; then
+        :
+       else
+          echo "*** Could not run IMLIB test program, checking why..."
+          CFLAGS="$CFLAGS $IMLIB_CFLAGS"
+          LIBS="$LIBS $IMLIB_LIBS"
+          AC_TRY_LINK([
+#include <stdio.h>
+#include <Imlib.h>
+],      [ return 0; ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding IMLIB or finding the wrong"
+          echo "*** version of IMLIB. If it is not finding IMLIB, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means IMLIB was incorrectly installed"
+          echo "*** or that you have moved IMLIB since it was installed. In the latter case, you"
+          echo "*** may want to edit the imlib-config script: $IMLIB_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     IMLIB_CFLAGS=""
+     IMLIB_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(IMLIB_CFLAGS)
+  AC_SUBST(IMLIB_LIBS)
+  rm -f conf.imlibtest
+])
+
+# Check for gdk-imlib
+AC_DEFUN(AM_PATH_GDK_IMLIB,
+[dnl 
+dnl Get the cflags and libraries from the imlib-config script
+dnl
+AC_ARG_WITH(imlib-prefix,[  --with-imlib-prefix=PFX Prefix where IMLIB is installed (optional)],
+            imlib_prefix="$withval", imlib_prefix="")
+AC_ARG_WITH(imlib-exec-prefix,[  --with-imlib-exec-prefix=PFX Exec prefix where IMLIB is installed (optional)],
+            imlib_exec_prefix="$withval", imlib_exec_prefix="")
+AC_ARG_ENABLE(imlibtest, [  --disable-imlibtest     Do not try to compile and run a test IMLIB program],
+		    , enable_imlibtest=yes)
+
+  if test x$imlib_exec_prefix != x ; then
+     imlib_args="$imlib_args --exec-prefix=$imlib_exec_prefix"
+     if test x${IMLIB_CONFIG+set} != xset ; then
+        IMLIB_CONFIG=$imlib_exec_prefix/bin/imlib-config
+     fi
+  fi
+  if test x$imlib_prefix != x ; then
+     imlib_args="$imlib_args --prefix=$imlib_prefix"
+     if test x${IMLIB_CONFIG+set} != xset ; then
+        IMLIB_CONFIG=$imlib_prefix/bin/imlib-config
+     fi
+  fi
+
+  AC_PATH_PROG(IMLIB_CONFIG, imlib-config, no)
+  min_imlib_version=ifelse([$1], ,1.9.4,$1)
+  AC_MSG_CHECKING(for IMLIB - version >= $min_imlib_version)
+  no_imlib=""
+  if test "$IMLIB_CONFIG" = "no" ; then
+    no_imlib=yes
+  else
+    GDK_IMLIB_CFLAGS=`$IMLIB_CONFIG $imlibconf_args --cflags-gdk`
+    GDK_IMLIB_LIBS=`$IMLIB_CONFIG $imlibconf_args --libs-gdk`
+
+    imlib_major_version=`$IMLIB_CONFIG $imlib_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    imlib_minor_version=`$IMLIB_CONFIG $imlib_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    imlib_micro_version=`$IMLIB_CONFIG $imlib_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`                  
+    if test "x$enable_imlibtest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $GDK_IMLIB_CFLAGS"
+      LIBS="$LIBS $GDK_IMLIB_LIBS"
+dnl
+dnl Now check if the installed IMLIB is sufficiently new. (Also sanity
+dnl checks the results of imlib-config to some extent
+dnl
+      rm -f conf.imlibtest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <gdk_imlib.h>
+
+int main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.gdkimlibtest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_imlib_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_imlib_version");
+     exit(1);
+   }
+
+    if (($imlib_major_version > major) ||
+        (($imlib_major_version == major) && ($imlib_minor_version > minor)) ||
+	(($imlib_major_version == major) && ($imlib_minor_version == minor) &&
+	($imlib_micro_version >= micro)))
+    {
+      return 0;
+    }
+  else
+    {
+      printf("\n*** 'imlib-config --version' returned %d.%d.%d, but the minimum version\n", $imlib_major_version, $imlib_minor_version, $imlib_micro_version);
+      printf("*** of IMLIB required is %d.%d.%d. If imlib-config is correct, then it is\n", major, minor, micro);
+      printf("*** best to upgrade to the required version.\n");
+      printf("*** If imlib-config was wrong, set the environment variable IMLIB_CONFIG\n");
+      printf("*** to point to the correct copy of imlib-config, and remove the file\n");
+      printf("*** config.cache before re-running configure\n");
+      return 1;
+    }
+}
+
+],, no_imlib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_imlib" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$IMLIB_CONFIG" = "no" ; then
+       echo "*** The imlib-config script installed by IMLIB could not be found"
+       echo "*** If IMLIB was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the IMLIB_CONFIG environment variable to the"
+       echo "*** full path to imlib-config."
+     else
+       if test -f conf.gdkimlibtest ; then
+        :
+       else
+          echo "*** Could not run IMLIB test program, checking why..."
+          CFLAGS="$CFLAGS $GDK_IMLIB_CFLAGS"
+          LIBS="$LIBS $GDK_IMLIB_LIBS"
+          AC_TRY_LINK([
+#include <stdio.h>
+#include <gdk_imlib.h>
+],      [ return 0; ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding IMLIB or finding the wrong"
+          echo "*** version of IMLIB. If it is not finding IMLIB, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means IMLIB was incorrectly installed"
+          echo "*** or that you have moved IMLIB since it was installed. In the latter case, you"
+          echo "*** may want to edit the imlib-config script: $IMLIB_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     GDK_IMLIB_CFLAGS=""
+     GDK_IMLIB_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(GDK_IMLIB_CFLAGS)
+  AC_SUBST(GDK_IMLIB_LIBS)
+  rm -f conf.gdkimlibtest
+])
+
+# Configure paths for ESD
+# David Walluck   99-9-20
+# Manish Singh    98-9-30
+# stolen back from Frank Belew
+# stolen from Manish Singh
+# Shamelessly stolen from Owen Taylor
+
+dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS
+dnl
+AC_DEFUN(AM_PATH_ESD,
+[dnl 
+dnl Get the cflags and libraries from the esd-config script
+dnl
+AC_ARG_WITH(esd-prefix,[  --with-esd-prefix=PFX   Prefix where ESD is installed (optional)],
+            esd_prefix="$withval", esd_prefix="")
+AC_ARG_WITH(esd-exec-prefix,[  --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)],
+            esd_exec_prefix="$withval", esd_exec_prefix="")
+AC_ARG_ENABLE(esdtest, [  --disable-esdtest       Do not try to compile and run a test ESD program],
+		    , enable_esdtest=yes)
+
+  if test x$esd_exec_prefix != x ; then
+     esd_args="$esd_args --exec-prefix=$esd_exec_prefix"
+     if test x${ESD_CONFIG+set} != xset ; then
+        ESD_CONFIG=$esd_exec_prefix/bin/esd-config
+     fi
+  fi
+  if test x$esd_prefix != x ; then
+     esd_args="$esd_args --prefix=$esd_prefix"
+     if test x${ESD_CONFIG+set} != xset ; then
+        ESD_CONFIG=$esd_prefix/bin/esd-config
+     fi
+  fi
+
+  AC_PATH_PROG(ESD_CONFIG, esd-config, no)
+  min_esd_version=ifelse([$1], ,0.2.5,$1)
+  AC_MSG_CHECKING(for ESD - version >= $min_esd_version)
+  no_esd=""
+  if test "$ESD_CONFIG" = "no" ; then
+    no_esd=yes
+  else
+    ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`
+    ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`
+
+    esd_major_version=`$ESD_CONFIG $esd_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    esd_minor_version=`$ESD_CONFIG $esd_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_esdtest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $ESD_CFLAGS"
+      LIBS="$LIBS $ESD_LIBS"
+dnl
+dnl Now check if the installed ESD is sufficiently new. (Also sanity
+dnl checks the results of esd-config to some extent
+dnl
+      rm -f conf.esdtest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <esd.h>
+
+int main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.esdtest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_esd_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_esd_version");
+     exit(1);
+   }
+
+   if (($esd_major_version > major) ||
+      (($esd_major_version == major) && ($esd_minor_version > minor)) ||
+      (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))
+    {
+      return 0;
+    }
+  else
+    {
+      printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);
+      printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);
+      printf("*** best to upgrade to the required version.\n");
+      printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");
+      printf("*** to point to the correct copy of esd-config, and remove the file\n");
+      printf("*** config.cache before re-running configure\n");
+      return 1;
+    }
+}
+
+],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_esd" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$ESD_CONFIG" = "no" ; then
+       echo "*** The esd-config script installed by ESD could not be found"
+       echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the ESD_CONFIG environment variable to the"
+       echo "*** full path to esd-config."
+     else
+       if test -f conf.esdtest ; then
+        :
+       else
+          echo "*** Could not run ESD test program, checking why..."
+          CFLAGS="$CFLAGS $ESD_CFLAGS"
+          LIBS="$LIBS $ESD_LIBS"
+          AC_TRY_LINK([
+#include <stdio.h>
+#include <esd.h>
+],      [ return 0; ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding ESD or finding the wrong"
+          echo "*** version of ESD. If it is not finding ESD, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means ESD was incorrectly installed"
+          echo "*** or that you have moved ESD since it was installed. In the latter case, you"
+          echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     ESD_CFLAGS=""
+     ESD_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(ESD_CFLAGS)
+  AC_SUBST(ESD_LIBS)
+  rm -f conf.esdtest
+])
+
+# Configure paths for AUDIOFILE
+# Bertrand Guiheneuf 98-10-21
+# stolen from esd.m4 in esound :
+# Manish Singh    98-9-30
+# stolen back from Frank Belew
+# stolen from Manish Singh
+# Shamelessly stolen from Owen Taylor
+
+dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for AUDIOFILE, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS
+dnl
+AC_DEFUN(AM_PATH_AUDIOFILE,
+[dnl 
+dnl Get the cflags and libraries from the audiofile-config script
+dnl
+AC_ARG_WITH(audiofile-prefix,[  --with-audiofile-prefix=PFX Prefix where AUDIOFILE is installed (optional)],
+            audiofile_prefix="$withval", audiofile_prefix="")
+AC_ARG_WITH(audiofile-exec-prefix,[  --with-audiofile-exec-prefix=PFX Exec prefix where AUDIOFILE is installed
+                          (optional)],
+            audiofile_exec_prefix="$withval", audiofile_exec_prefix="")
+AC_ARG_ENABLE(audiofiletest, [  --disable-audiofiletest Do not try to compile and run a test AUDIOFILE program],
+		    , enable_audiofiletest=yes)
+
+  if test x$audiofile_exec_prefix != x ; then
+     audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix"
+     if test x${AUDIOFILE_CONFIG+set} != xset ; then
+        AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config
+     fi
+  fi
+  if test x$audiofile_prefix != x ; then
+     audiofile_args="$audiofile_args --prefix=$audiofile_prefix"
+     if test x${AUDIOFILE_CONFIG+set} != xset ; then
+        AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config
+     fi
+  fi
+
+  AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no)
+  min_audiofile_version=ifelse([$1], ,0.1.5,$1)
+  AC_MSG_CHECKING(for AUDIOFILE - version >= $min_audiofile_version)
+  no_audiofile=""
+  if test "$AUDIOFILE_CONFIG" = "no" ; then
+    no_audiofile=yes
+  else
+    AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs`
+    AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags`
+    audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_audiofiletest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
+      LIBS="$LIBS $AUDIOFILE_LIBS"
+dnl
+dnl Now check if the installed AUDIOFILE is sufficiently new. (Also sanity
+dnl checks the results of audiofile-config to some extent
+dnl
+      rm -f conf.audiofiletest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <audiofile.h>
+
+int main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.audiofiletest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_audiofile_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_audiofile_version");
+     exit(1);
+   }
+
+   if (($audiofile_major_version > major) ||
+      (($audiofile_major_version == major) && ($audiofile_minor_version > minor)) ||
+      (($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro)))
+    {
+      return 0;
+    }
+  else
+    {
+      printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version);
+      printf("*** of AUDIOFILE required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro);
+      printf("*** best to upgrade to the required version.\n");
+      printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n");
+      printf("*** to point to the correct copy of audiofile-config, and remove the file\n");
+      printf("*** config.cache before re-running configure\n");
+      return 1;
+    }
+}
+
+],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_audiofile" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$AUDIOFILE_CONFIG" = "no" ; then
+       echo "*** The audiofile-config script installed by AUDIOFILE could not be found"
+       echo "*** If AUDIOFILE was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the AUDIOFILE_CONFIG environment variable to the"
+       echo "*** full path to audiofile-config."
+     else
+       if test -f conf.audiofiletest ; then
+        :
+       else
+          echo "*** Could not run AUDIOFILE test program, checking why..."
+          CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
+          LIBS="$LIBS $AUDIOFILE_LIBS"
+          AC_TRY_LINK([
+#include <stdio.h>
+#include <audiofile.h>
+],      [ return 0; ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding AUDIOFILE or finding the wrong"
+          echo "*** version of AUDIOFILE. If it is not finding AUDIOFILE, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means AUDIOFILE was incorrectly installed"
+          echo "*** or that you have moved AUDIOFILE since it was installed. In the latter case, you"
+          echo "*** may want to edit the audiofile-config script: $AUDIOFILE_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     AUDIOFILE_CFLAGS=""
+     AUDIOFILE_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(AUDIOFILE_CFLAGS)
+  AC_SUBST(AUDIOFILE_LIBS)
+  rm -f conf.audiofiletest
+])
+# Configure paths for GNOME
+# David Walluck   99-9-24
+
+dnl AM_PATH_GNOME([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for GNOME, and define GNOME_CFLAGS and GNOME_LIBS
+dnl
+AC_DEFUN(AM_PATH_GNOME,
+[dnl
+dnl Get the cflags and libraries from the gnome-config script
+dnl
+AC_ARG_WITH(gnome-prefix,[  --with-gnome-prefix=PFX Prefix where GNOME is installed (optional)],
+            gnome_prefix="$withval", gnome_prefix="")
+AC_ARG_WITH(gnome-exec-prefix,[  --with-gnome-exec-prefix=PFX Exec prefix where GNOME is installed (optional)],
+            gnome_exec_prefix="$withval", gnome_exec_prefix="")
+AC_ARG_ENABLE(gnometest, [  --disable-gnometest     Do not try to compile and run a test GNOME program],
+		    , enable_gnometest=yes)
+
+  if test x$gnome_exec_prefix != x ; then
+     gnome_args="$gnome_args --exec-prefix=$gnome_exec_prefix"
+     if test x${GNOME_CONFIG+set} != xset ; then
+        GNOME_CONFIG=$gnome_exec_prefix/bin/gnome-config
+     fi
+  fi
+  if test x$gnome_prefix != x ; then
+     gnome_args="$gnome_args --prefix=$gnome_prefix"
+     if test x${GNOME_CONFIG+set} != xset ; then
+        GNOME_CONFIG=$gnome_prefix/bin/gnome-config
+     fi
+  fi
+
+  AC_PATH_PROG(GNOME_CONFIG, gnome-config, no)
+  min_gnome_version=ifelse([$1], ,0.2.7,$1)
+  AC_MSG_CHECKING(for GNOME - version >= $min_gnome_version)
+  no_gnome=""
+  if test "$GNOME_CONFIG" = "no" ; then
+    no_gnome=yes
+  else
+    GNOME_CFLAGS=`$GNOME_CONFIG $gnomeconf_args gnome --cflags`
+    GNOME_LIBS=`$GNOME_CONFIG $gnomeconf_args gnome --libs`
+
+    gnome_major_version=`$GNOME_CONFIG $gnome_args --version | \
+           sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    gnome_minor_version=`$GNOME_CONFIG $gnome_args --version | \
+           sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    gnome_micro_version=`$GNOME_CONFIG $gnome_config_args --version | \
+           sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_gnometest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $GNOME_CFLAGS"
+      LIBS="$LIBS $GNOME_LIBS"
+dnl
+dnl Now check if the installed GNOME is sufficiently new. (Also sanity
+dnl checks the results of gnome-config to some extent
+dnl
+      rm -f conf.gnometest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <gnome.h>
+
+int main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.gnometest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_gnome_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_gnome_version");
+     exit(1);
+   }
+
+   if (($gnome_major_version > major) ||
+      (($gnome_major_version == major) && ($gnome_minor_version > minor)) ||
+      (($gnome_major_version == major) && ($gnome_minor_version == minor) && ($gnome_micro_version >= micro)))
+    {
+      return 0;
+    }
+  else
+    {
+      printf("\n*** 'gnome-config --version' returned %d.%d.%d, but the minimum version\n", $gnome_major_version, $gnome_minor_version, $gnome_micro_version);
+      printf("*** of GNOME required is %d.%d.%d. If gnome-config is correct, then it is\n", major, minor, micro);
+      printf("*** best to upgrade to the required version.\n");
+      printf("*** If gnome-config was wrong, set the environment variable GNOME_CONFIG\n");
+      printf("*** to point to the correct copy of gnome-config, and remove the file\n");
+      printf("*** config.cache before re-running configure\n");
+      return 1;
+    }
+}
+
+],, no_gnome=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_gnome" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])
+  else
+     AC_MSG_RESULT(no)
+     if test "$GNOME_CONFIG" = "no" ; then
+       echo "*** The gnome-config script installed by GNOME could not be found"
+       echo "*** If GNOME was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the GNOME_CONFIG environment variable to the"
+       echo "*** full path to gnome-config."
+     else
+       if test -f conf.gnometest ; then
+        :
+       else
+          echo "*** Could not run GNOME test program, checking why..."
+          CFLAGS="$CFLAGS $GNOME_CFLAGS"
+          LIBS="$LIBS $GNOME_LIBS"
+          AC_TRY_LINK([
+#include <stdio.h>
+#include <gnome.h>
+],      [ return 0; ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding GNOME or finding the wrong"
+          echo "*** version of GNOME. If it is not finding GNOME, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means GNOME was incorrectly installed"
+          echo "*** or that you have moved GNOME since it was installed. In the latter case, you"
+          echo "*** may want to edit the gnome-config script: $GNOME_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     GNOME_CFLAGS=""
+     GNOME_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(GNOME_CFLAGS)
+  AC_SUBST(GNOME_LIBS)
+  rm -f conf.gnometest
+])